Sudbury Forklift Training Course

Sudbury Forklift Training Course - Federal and industry regulators have established the criteria for forklift safety training based on their current regulations and standards. Individuals wanting to operate a forklift must complete a forklift training program before working with one of these machinery. The accredited Forklift Operator Training Program is designed to provide people training with the knowledge and practical skills to become an operator of a forklift.

There are forklift operation safety regulations which must be followed pertaining to pre-shift inspections, and regulations for loading and lifting.

An inspection checklist must be completed and given to the supervising authority prior to beginning a shift. When a maintenance issue is uncovered, the use of the particular machinery must be discontinued until the problem has been dealt with. To be able to indicate the machinery is out of order, the keys have to be removed from the ignition and a warning tag placed in a visible location.

Loading safety regulations consist of checking the rating capacity on the forklift nameplate and determining if the weight of the load falls within capacity. The forklift forks should be in the downward position when the forklift is starting up. Keep in mind that there is a loss of approximately one hundred pounds carrying capacity for every inch further away from the carriage that the load is carried.

To safely lift a palletized load, drive the forklift toward the pallet and stop with the fork three inches away from the load. Level the mast until it is at right angles to the load. Lift the forks to one inch under the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to alert other staff. Do not allow forks to drag on the ground.

The load should be loaded by the forklift in such a way that ensures the load is secure and will not cause a danger to other objects or people. Restraining loads is needed for materials which could shift during transport and destabilize the forklift.

To avoid the shifting of drums, drums can be strapped together to reduce movement. Operators of forklifts should drive slowly when lifting liquids, to reduce instability in the forklift.

Click to Download the pdf